Solar-Assisted Fuel Production in Microgravity Environment

Future long-term space travel and cis-lunar research platforms such as the Deep Space Gateway require a reliable life support system and - similarly to our demands on Earth - a renewable energy source. The production of so-called ‘solar fuels’, i.e. fuels such as hydrogen or long-chain hydrocarbons generated only from sunlight, water and carbon dioxide is currently investigated for terrestrial applications. These solar fuels are promising candidates for meeting the global quest for alternative energy sources. Currently, the most efficient systems comprise the ones operating according to the natural photosynthetic process: semiconductors are employed as light absorbers which transfer electrons upon photoexcitation to integrated electrocatalysts, catalyzing the respective half-cell reaction of water-splitting (photoanode) or fuel production (photocathode). Although, these systems are interesting as well for space applications from the point of oxygen and fuel generation, solar fuel production in microgravity environment has not been realized and investigated yet.

Go to the profile of Katharina Brinkert
Jul 19, 2018
Upvote 1 Comment

The paper in Nature Communications is here:

In an experimental series at the Bremen Drop Tower, we could unprecedentedly produce hydrogen in 9.3s of free fall in a photoelectrochemical set-up employing p-type indium phosphide as the photocathode material and rhodium as a deposited thin film electrocatalyst. While studying the system in the absence of microgravity (and therefore also the absence of buoyancy) we discovered that hindered gas bubble detachment at the electrode surface influenced mass transfer of protons from the acidic electrolyte solution to the photoelectrode which reduced the overall efficiency of the half-cell during free fall. By nanostructuring the electrocatalyst surface employing shadow nanosphere lithography, we could demonstrate efficient solar-assisted hydrogen in microgravity environment which favors gas bubble release from the electrode surface and therefore, overcome mass-transfer limitations. Theoretical simulations of the ‘nanostructured’ and ‘thin film’ photoelectrode complemented the studies.

With these first experiments on solar hydrogen production in microgravity environment we hope to bridge the solar fuels research community and the space research community, realizing that both communities actually have the same goal: generating a reliable and stable renewable energy supply by only producing oxygen as a byproduct - for long term space missions and to meet our future energy demand on Earth. Taking only water, CO2 and sunlight as a substrate and producing high-energy density fuels, a solar fuel device is a promising alternative to currently existing life support technologies - and it seems that both research communities can actually learn a lot from each other.

Our team would like to thank all contributors - especially, the great support we have received from the European Space Agency and the Bremen Drop Tower. It has been a great pleasure and fun to work with everyone!

Drop Capsule.
Drop Capsule with experimental set-up.
Bremen Drop Tower
Bremen Drop Tower at ZARM. 

This Behind the Paper was first published on the Nature Research Chemistry Community

Go to the profile of Katharina Brinkert

Katharina Brinkert

Postdoctoral Scholar, California Institute of Technology

No comments yet.